YT-450 Upgrade? Yup!

My first HF radio was a Yaesu FT-450D. Like many radios with an internal tuner, it was limited to 3:1 SWR matching. Since I was using a G5RV Jr for an antenna at the time, this was not quite enough to properly tune across 40 meters. 80 meters was out of the question. A local ham had some gear from an SK that was needing a new home and one of the items was an LDG YT-450 external tuner, made to be paired with the 450D. It was also made to be used with the FT-950 which is how it was being used. It was the right time at the right price, so I purchased it. It worked great with the 450D. But, about a year later I sold the FT-450D and upgraded to the newer FT-991. The YT-450 did work with the 991! For a while…

A Yaesu firmware upgrade put an end to that, and it stopped working. And that is where I was stuck for a while. I had changed to a fan dipole, and later to an OCF dipole. So 3:1 matching was again within my reach, although on 40 or 80 meters I would get weird SWR sometimes.

I was getting ready to move some things around in my go-box and was staring a the YT-450 thinking of just removing it, selling it, and purchasing a YT-1200 which is compatible with the FT-991. It is nice to have the wider range tuner because we sometimes want to use an end-fed, or random wire, and so a good external tuner can really come in handy. So I hit the Interwebs to find a deal and ‘lo and behold…

I came across a chip upgrade on CheapHams.com that replaces the ROM with a new ROM that makes the YT-450 essentially a YT-1200, which restores compatibility with the FT-991! For $20, they send you chip and a sheet of instructions for installing the chip, and the parameters to set on the FT-991. 4 small screws and 10 minutes later and… Done! I have a working tuner again… for $20!