As we talked about earlier this year about operating FT-8 using Ham Radio Deluxe, WSJT-X and JT-Alert. I mentioned keeping all those in sync has been a pain and there have been a bunch of changes with JT-Alert and the FT-8 standards. Well, here is a way to only use two of them…
Haven’t tried this yet, but anxious to do so…. Will post my results here.
From the Ham Radio Deluxe e-mail…..
Video Demo of WSJT-X Connected Directly to Logbook
As mentioned in the 188.8.131.526 release notice sent recently, we have improved the ability to integrate WSJT-X with Ham Radio Deluxe Logbook.
Prior to this release, the use of JTAlert was required. Many customers enjoyed this method and tens of thousands of (FT8, JT65, JT9, etc) QSOs have been made with this method. We will still continue to support this method and the efforts of the JTAlert developer to continue and improve JTAlert.
With this release, Ham Radio Deluxe users can connect WSJT-X directly to Logbook and QSOs made in WSJT-X are automatically added into Logbook. This feature is called “QSO Forwarding” in Logbook. WSJT-X refers to it as “Reporting”.
We had many requests from our clients to provide this feature and I’m very pleased with how it works.
I have created a 7 minute video that demonstrations how to configure WSJT-X and Ham Radio Deluxe 184.108.40.2066 to do this. The first two minutes of the video demonstrates the setup. In the remaining five minutes, I make a few FT8 QSOs and you can see them going immediately into Logbook.
The video is on our YouTube channel here
The Chinese have now successfully copied the DV Mega digital radio board (also called the MMDVM) that had been the key to many of the $200-300 hotspots many hams have been using to get on DMR. I put mine together last year by buying a DV Mega 70cm board and mating it with a Raspberry Pi 3. It’s worked like a champ, but I spent about $200 for the two boards, then added a $100 case and power supply that has allowed it to run on the cylindrical 18650 Lithium cells. All together, I spent about $330.
Now you can buy a tiny hotspot that does everything mine does (except the batteries), and now including a neat little color display, for $105 on Amazon or eBay. I decided to buy the one on Amazon and check it out. Here is a link to the one I now have:
It comes with a 3 foot USB to USB mini cable that is used to power it up. The only thing you have to do to get it started is to copy a small file that has your Wi-Fi network name and password to the micro SD memory card that comes with the hotspot. This allows you to reboot it and then edit the details in a web page that hooks it up to the right BrandMeister server and has you name, DMR ID, and a few other things. You should order a micro SD-to-USB adapter if your laptop doesn’t already have an SD slot. That’s only another $8 or so.
The software that runs on this hotspot is called Pi-Star, and is a collaborative effort between a guy in Shenzhen, China, and a U.S. ham, so you likely won’t encounter much of that inscrutable Chinglish verbiage that often plagues Chinese radio buyers.
I’m very impressed with both the Pi-Star software/firmware, and the tiny size of this neat little unit. Running on the standard USB 5 volts, you can grab it and plug it into your computer, your phone charger, or maybe even a USB port in your late-model car. It takes about 2 minutes to boot up (watch the display for a clue), then you’re good to go…maybe. Did I forget to mention that you must carry around a Wi-Fi to cellular phone modem? You can enter the names of several Wi-Fi networks, and the Pi-Star software will switch to whatever it finds. Many people don’t realize that they have free or low-cost ($25/mo) Wi-Fi cellular modems in their smartphones. This little guy will work with any of them, as long as it’s using the 2.4 GHz band. Sorry no 5 Gig.
Anyway, you can’t beat the price, and I can tell you that mine works as well as my $300+ unit.